- Boiler Parts[6]
- Stainless Steel Pipes[6]
- Steel Pipes[6]
- Contact Person : Mr. Sun Jack
- Company Name : Hebei Elite Pipe Industry Co., Ltd.
- Tel : 0086-1330-3073765
- Address : Hebei,Cangzhou,Economic development zone of Cangdong
- Country/Region : China
- Zip : 060000
ASTM A519 Seamless Carbon and Alloy Mechanical Tubing
Related Product Searches:ASTM A519 Seamless Carbon and Alloy Mechanical Tubing,High Quality,ASTM A519 seamless carbon, carbon and alloy steel
ASTM A519 specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. Usage for Seamless carbon and Alloy Steel Mechanical Tubing.
APPLICATION:
For mechanical engineering
For mechanical and pressure use,and also for transporting steam,water,gas and etc.
SIZE(MM):
Out diameter:10-324mm
Wall Thickness:1-30mm
Length:14000mm max
Chemical Requirements of Low-Carbon Steels
Grade Designation | Chemical Composition Limits, % | |||
CarbonA | ManganeseB | PhosphorusB, max | SulfurB, max | |
MT 1010 | 0.05-0.15 | 0.30-0.60 | 0.040 | 0.050 |
MT 1015 | 0.10-0.20 | 0.30-0.60 | 0.040 | 0.050 |
MT X 1015 | 0.10-0.20 | 0.60-0.90 | 0.040 | 0.050 |
MT 1020 | 0.15-0.25 | 0.30-0.60 | 0.040 | 0.050 |
MT X 1020 | 0.15-0.25 | 0.70-1.00 | 0.040 | 0.050 |
A: Limits apply to heat and product analyses.
B: Limits apply to heat analysis; except as required by 6.1, product analyses are subject to the applicable additional tolerances given in Table 5
Chemical Requirements of Other Carbon Steels
Grade Designation | Chemical Composition Limits, %A | |||
Carbon | Manganese | Phosphorus, max | Sulfur, max | |
1008 | 0.10 max | 0.30-0.50 | 0.040 | 0.050 |
1010 | 0.08-0.13 | 0.30-0.60 | 0.040 | 0.050 |
1012 | 0.10-0.15 | 0.30-0.60 | 0.040 | 0.050 |
1015 | 0.13-0.18 | 0.30-0.60 | 0.040 | 0.050 |
1016 | 0.13-0.18 | 0.60-0.90 | 0.040 | 0.050 |
1017 | 0.15-0.20 | 0.30-0.60 | 0.040 | 0.050 |
1018 | 0.15-0.20 | 0.60-0.90 | 0.040 | 0.050 |
1019 | 0.15-0.20 | 0.70-1.00 | 0.040 | 0.050 |
1020 | 0.18-0.23 | 0.30-0.60 | 0.040 | 0.050 |
1021 | 0.18-0.23 | 0.60-0.90 | 0.040 | 0.050 |
1022 | 0.18-0.23 | 0.70-1.00 | 0.040 | 0.050 |
1025 | 0.22-0.28 | 0.30-0.60 | 0.040 | 0.050 |
1026 | 0.22-0.28 | 0.60-0.90 | 0.040 | 0.050 |
1030 | 0.28-0.34 | 0.60-0.90 | 0.040 | 0.050 |
1035 | 0.32-0.38 | 0.60-0.90 | 0.040 | 0.050 |
1040 | 0.37-0.44 | 0.60-0.90 | 0.040 | 0.050 |
1045 | 0.43-0.50 | 0.60-0.90 | 0.040 | 0.050 |
1050 | 0.48-0.55 | 0.60-0.90 | 0.040 | 0.050 |
1518 | 0.15-0.21 | 1.10-1.40 | 0.040 | 0.050 |
1524 | 0.19-0.25 | 1.35-1.65 | 0.040 | 0.050 |
1541 | 0.36-0.44 | 1.35-1.65 | 0.040 | 0.050 |
A: The ranges and limits given in this table apply to heat analysis; except as required by 6.1, product analyses are subject to the applicable additional tolerances given in table Number 5
ASTM A519 Seamless Carbon and Alloy Mechanical Tubing
